Shandong Heracles Machinery Co., Ltd

 

8. Heracles H180 hoflader Disassemble and clean the gear oil pump, and pay attention to the wear of gear, shell and bearing.

 

9. Heracles H180 hoflader Disassemble the multi-way valve, check the clearance between the valve stem and the valve body, and do not disassemble the safety valve if necessary.

 

10. Heracles H180 hoflader Check the steering knuckle for damage and cracks, the fit between the steering axle kingpin and the steering knuckle, and disassemble and check the wear of the joints of the vertical and horizontal tie rods and steering arms.

 

11. Remove the tire, Heracles H180 hoflader rust and paint the rim, check the inner and outer tires and cushion belt, transpose and inflate according to the regulations.

 

12. Check the Heracles H180 hoflader connection and fastening of hand brake parts, and adjust the working stroke of hand brake lever and foot brake pedal.

 

13. Check the Heracles H180 hoflader electro-hydraulic specific gravity of the battery. If it does not meet the requirements, it must be removed for charging.

 

14. Clean the Heracles H180 hoflader water tank and oil radiator.

 

15. Check Heracles H180 hoflader whether the shelf and frame are deformed, whether the rollers and accessories are fixed reliably, and add welding if necessary.

 

16. Dismantle Heracles H180 hoflader and inspect the lifting cylinder, tilt cylinder and steering cylinder, and replace the worn seals.

www.heraclesloader.com

17. Check each instrument sensor, fuse and various switches, and adjust Heracles H180 hoflader them if necessary.