Shandong Heracles Machinery Co., Ltd

H140 hoflader will not only block the relative movement, accelerate the wear of parts, but H140 hoflader also scratch the mating surfaces, damage the lubricating oil film, raise the temperature of parts and deteriorate the lubricating oil. According to the measurement, when the excavator impurities in the lubricating oil increase to 0.15%, the wear degree of the first piston ring of the engine will be 2.5 times higher .The wear on the working surface of parts, corrosion on the h130 radlader surface of parts and aging of materials are the shandong tongwu machinery equipment  three main failure forms of excavator parts under normal service conditions, and the wear on the working surface of parts accounts for the largest proportion of failures. In other words, the heracles loader H140  wear of excavator is one of the main reasons for its various parts to reach the limit technical state. In order to solve the wear problem of excavator parts, ,If the bearing of the generator lacks oil or is poorly lubricated, the rolling resistance of the bearing will be too large, and the outer race and inner race of the heracles H140 loader bearing will rotate synchronously, which will lead to excessive wear between the bearing and the bearing seat. Excessive bearing wear will cause friction between the rotor and stator of the generator, resulting in overheating of the  shandong nuoman heracles H140 loader generator and instability of the voltage and current of the H140 heracles loader generator. www.heraclesloader.com